Dye Upgrades

  Stock Circuit Board for Dye DM M2

Two columns of 10 rounds for a 20 round capacity. Shaped projectile and .68 Caliber ready. This magazine fed system actually loads faster than a Rotor™. Automatic anti-dimple spring driven design for reliability through simplicity. Retention doors...

Proto Eye Wire Harness - PMR / Rail 2007-2010 Stock OEM replacement eyes for your Proto PMR/RAIL 2007-2010. DOES NOT FIT 2011 RAIL or REFLEX RAIL!

The DM7 Continuous Flow Plug replaces the stock on/off plug in the front of the DM7 eliminating leaking and increasing the flow capacity of the DM7. The DM7 CFP (Continuous Flow Plug) comes with o-rings and is ready to install.

Old school classics meet modern performance.  The Dye DFF-20 Wire 3D Beavertail is designed to fit a wide range of Autocockers from various years including the DFF-20 45 frame. The design takes a lightweight approach to design with a 3D milled...

  This is a replacement board for the DYE box rotor. R93960001

DESCRIPTION This all inclusive kit gives you the player everything you need to do a major overhaul of your SLG paintball marker. From eyes, solenoids, board, to o-rings this kit has you covered! FEATURE QUICK VIEW   Bleed button o-ring...

The DYE Modular Picatinny Shroud is another section of barrel shroud that allows you to create additional length to the factory DYE DAM paintball marker shroud. It is identical in length and design as the two factory sections shipped with every DAM. Just...

The DSR+ IM Pro upgrade kit will take you DSR or DSR+ to a new level.  These upgrades will improve efficiency and shot quality on your DSR or DSR+.   Kit includes: IM solenoid spool x 1- Fits DSR+ only (electronic). IM isolator plate x 1...

  DYE Circuit Board DM6-9 PMR 09 Reflex

  Stock Circuit Board for Dye DM 11/12

The L7 Bolt System for the DYE and Proto Matrix takes accuracy, speed, and efficiency to a whole new level. The idea behind the L7 Bolt System is to reduce the moving mass inside of the marker to the bare minimum. Lightening the bolt...

Fits Rize CZR,  Rize, Rize MaXXed, and SLG UL frame

DAM Feedneck Cover Plate - Black

The Exalt RIZE CZR Feedneck Thumbscrew allows you to adjust your feedneck tension with ease to fit loaders with different thickness necks

Old school classics meet modern performance. The all-new DFF-20 Lockdwn Feedneck for the autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Double clamp design Fits standard autococker feedneck...