Dye Upgrades

DESCRIPTION The DSR+ Reverse Double trigger is homage to one of our oldest trigger designs that provides a unique design with its double reverse humps. The trigger is an all-aluminum design made in the USA at our San Diego facility. Comes will all...

Dye DAM Sticky Grip - gREY

Main Circuit board with thumbstick board.  Compatible Markers: M3+ M3s Markers that will need programming, but also compatible: DLS M2 MOSAir, **Will lose ability to read LPR PSI on screen** M2, **Will lose ability to read LPR PSI on screen**

Proto Eye Wire Harness - PMR / Rail 2007-2010 Stock OEM replacement eyes for your Proto PMR/RAIL 2007-2010. DOES NOT FIT 2011 RAIL or REFLEX RAIL!

The DM7 Continuous Flow Plug replaces the stock on/off plug in the front of the DM7 eliminating leaking and increasing the flow capacity of the DM7. The DM7 CFP (Continuous Flow Plug) comes with o-rings and is ready to install.

Old school classics meet modern performance.  The Dye DFF-20 Wire 3D Beavertail is designed to fit a wide range of Autocockers from various years including the DFF-20 45 frame. The design takes a lightweight approach to design with a 3D milled...

  This is a replacement board for the DYE box rotor. R93960001

DESCRIPTION This all inclusive kit gives you the player everything you need to do a major overhaul of your SLG paintball marker. From eyes, solenoids, board, to o-rings this kit has you covered! FEATURE QUICK VIEW   Bleed button o-ring...

The DSR+ IM Pro upgrade kit will take you DSR or DSR+ to a new level.  These upgrades will improve efficiency and shot quality on your DSR or DSR+.   Kit includes: IM solenoid spool x 1- Fits DSR+ only (electronic). IM isolator plate x 1...

  Stock Circuit Board for Dye DM 11/12

The L7 Bolt System for the DYE and Proto Matrix takes accuracy, speed, and efficiency to a whole new level. The idea behind the L7 Bolt System is to reduce the moving mass inside of the marker to the bare minimum. Lightening the bolt...

Fits Rize CZR,  Rize, Rize MaXXed, and SLG UL frame

DAM Feedneck Cover Plate - Black

The BWing21 DSR trigger was designed by Senior Development Manager, Billy Wing, for his personal DSR. This design promotes a lower perch on the trigger creating greater leverage. The raised mid-point and tip of the trigger blade offer positive contact...

DESCRIPTION With the popularity and high demand of the open source files that can be 3-D printed, DYE LAB customers can now order the BWing21 M3s/M3+ trigger shape in aluminum! Triggers are a limited run and available for a limited time exclusively...

  This is a 3D Print  - Not made by DYE - Printed locally