Dye Upgrades

Old school classics meet modern performance.  The Dye DFF-20 Wire 3D Beavertail is designed to fit a wide range of Autocockers from various years including the DFF-20 45 frame. The design takes a lightweight approach to design with a 3D milled...

  This is a replacement board for the DYE box rotor. R93960001

DESCRIPTION This all inclusive kit gives you the player everything you need to do a major overhaul of your SLG paintball marker. From eyes, solenoids, board, to o-rings this kit has you covered! FEATURE QUICK VIEW   Bleed button o-ring...

The DYE Modular Picatinny Shroud is another section of barrel shroud that allows you to create additional length to the factory DYE DAM paintball marker shroud. It is identical in length and design as the two factory sections shipped with every DAM. Just...

The DSR+ IM Pro upgrade kit will take you DSR or DSR+ to a new level.  These upgrades will improve efficiency and shot quality on your DSR or DSR+.   Kit includes: IM solenoid spool x 1- Fits DSR+ only (electronic). IM isolator plate x 1...

  Stock Circuit Board for Dye DM 11/12

The L7 Bolt System for the DYE and Proto Matrix takes accuracy, speed, and efficiency to a whole new level. The idea behind the L7 Bolt System is to reduce the moving mass inside of the marker to the bare minimum. Lightening the bolt...

Fits Rize CZR,  Rize, Rize MaXXed, and SLG UL frame

DAM Feedneck Cover Plate - Black

The BWing21 DSR trigger was designed by Senior Development Manager, Billy Wing, for his personal DSR. This design promotes a lower perch on the trigger creating greater leverage. The raised mid-point and tip of the trigger blade offer positive contact...

DESCRIPTION With the popularity and high demand of the open source files that can be 3-D printed, DYE LAB customers can now order the BWing21 M3s/M3+ trigger shape in aluminum! Triggers are a limited run and available for a limited time exclusively...

  This is a 3D Print  - Not made by DYE - Printed locally

Old school classics meet modern performance. The all-new DFF-20 Lockdwn Feedneck for the autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Double clamp design Fits standard autococker feedneck...

Old school classics meet modern performance. The all-new DFF-20 Hyper Regulator for the autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Proven Hyper Reg performance Pressure downstream bleed...

Dye DSR Battery Harness Only you need to complete a Battery Housing Repair for your DYE DSR R 9v Battery Holder 81.6mm x1 DSR 9v Battery Wire L100mm x 1        9v Battery wire,L100mm x1 8-32...

Old school classics meet modern performance. The all-new DFF-20 Low Pressure Reg (LPR) for the autococker, a collaborative project between the designers at DYE LAB and Freeflow Technology. Shared reg seat with M3, DSR and DFF-20 Hyper Reg ...