Tippmann A5 Internal Upgrades

Fits most Tippmanns and similar BT & Valken markers. Most Tippmanns use a drive spring to push the hammer forward into the valve. Our kit includes 6 springs of varying strength so that you can use the spring that best works for what your setup /...

Most Tippmanns use a drive spring to push the hammer forward into the valve. Our kit includes 6 springs of varying strength so that you can use the spring that best works for what your setup / objective is. Silver is the weakest, then green, blue,...

The FAT HOSE Kit for the Tippmann Cyclone Feed is the best and easiest way to get more from your loader. With the FAT HOSE Kit your loader will perform better at lower pressures. The larger hose gauge allows more air to reach the Cyclone Feed Actuator...

 Lightening Rod enables users with Cyclone feed systems to achieve higher rates of fire and also increase their air efficiency. By using a brash bushing connection point between the ratchet and rod, you will get a smoother action that requires less air...

If you are having problems with breaking paintballs in your cyclone feed. Then this is the paddles for you. These are extra soft rubber paddles gental on all paint

Dead On Paintball 98/98C Rear Velocity Adjuster - No Tools Required 

Cyclone aluminum piston rod upgrade for your Tippmann A5 or X7. This upgrade is a component needed to improve the speed and efficiency of your cyclone feed system. Rod is made out of solid aluminum instead of plastic like the stock rod. ...

Combo includes: Ape board for the Tippmann X7 and A5 HE and our TECHT X7/A5 HE Fang trigger. Ape Board and TECHT Ultimate Upgrade Combo for the Tippmann X7 and A5 HE includes: the Ape Board for the Tippmann X7 and A5 HE and TECHT X7/A5 HE Fang Trigger...

If you are having problems with breaking paintballs in your cyclone feed. Then this is the paddles for you. These are standard rubber paddles. 

Soft replacement paddles for the A5 or Phenom.  

The TechT E-Z Cyclone Feed Cover is a clear cover plate for the Tippmann Cyclone Feed that allows players to quickly check their status on the loader if it needs to be cleaned or lubricated. This is a direct replacement and definitely a must have for...

If you want a smooth and soft trigger pull on your Tippmann marker that you can adjust to your particular liking, then as always TechT is here to give you what you want. This kit has three replacement trigger return springs that allow you to customize...

TECHT NEW ZERO KICK HAMMER FITS THE TIPPMANN TMC ONLY The TechT Zero Kick Hammer SE gives Tippmann players a huge advantage over their other Tippmann paintball guns just in sheer terms of higher rates of fire and dramatically reduce recoil for add...

The TechT Squishy Paddles are an upgrade from the regular paddles that come on the Tippmann Cyclone Feed System that helps prevent the loader from slicing or smashing paint together because the stock paddles are hard plastic. The Squishy paddles are...

The Vortex SS Mod is the same as previous versions that gave extended life to your cyclone feed system with more consitent feed rates but now added with a few more features that will help anyone new on installation. The Teflon Hard Coat aluminum...

The TechT Quck Exhaust Piston Housing (QEPH) is an upgrade for the Tippmann Cyclone Feed System. The QEPH allows the loader to vent out excess gas quickly and easily which means you can feed faster and use less pressure. The QEPH allows gas to vent...