Description
Tippmann paintball guns with response triggers needs to distribute the excess gas from the gun to the response system also the cyclone feed system. This part can start to wear out after the years or even snap off altogether!
Features:
- Tippmann factory genuine replacement part
- Part # TA01022
- Banjo T-Fitting for Tippmann A5 or Tippmann 98 paintball guns with cyclone and response triggers
Related Products
Related Products
Tippmann 98/A5/X7 /FT12 Valve Plunger
Tippmann
$7.95
Internal leaking in your Tippmann 98 paintball gun? Sometimes you don't need to replace the entire valve as this is usually the suspect of all your problems!
Features:
Factory Genuine...
Tippmann A5/98 non-ACT Linkage Arm
Tippmann
$6.00
The Tippmann linkage arm links the hammer to the bolt making sure it works in perfect unison. It makes a point to make sure all the parts are still in perfect condition so your gun won't go down at...
Tippmann 98/A5/BT Hammer/VALVE O-ring
Tippmann
$3.95
These are the o-rings for the hammer on a Tippmann 98, Tippmann A5, and BT Combat markers.
They will also fit the Valve for the Tippmann Guns.
Tippmann 98/A5/X7 Ball Latch | Ball Detent
Tippmann
$5.90
These are the replacement Ball Latch/Ball Detent for the Tippmann Paintball guns. These prevent the paintballs from continually feeding even when your gun is not shooting so it's definitely a must...
